| Leveling tines | - Vertically adjustable spring steel dovetail levelling tines
| TF Series | More Info |
| Roller tiller | - Spring-loaded roller tiller for the TF Series Roller Tiller Ø 320 mm with ribbed and corrugated Hardox flat steel bars Depth setting with spindle adjustment
| TF Series | More Info |
| Stabilising wheels | - Stabilising wheels vertically adjustable via spindle with stainless steel depth dial
| TF Series | More Info |
| TFAS | - Scraper for stabilising wheel/pc.
| TF Series | More Info |
| TFAZ8 | - Extra charge for tines spring-tooth harrow 60 x 8 mm instead of 60 x 6 mm
| TF Series | More Info |
| THGF150_TF | - Duck foot blade 150 mm wide for Treffler spring tooth harrow made of 3 mm Hardox
| TF Series | More Info |
| 3-row harrow | - 3-row leaf spring harrow: line spacing 100 mm, 3 m harrow
| TF Series | More Info |
| WTS3 | - Warning sign with lighting
| TF Series | More Info |
| EPS5SM | - Type EPS 5 seeder with Seedmaster type control electronic system
| TG Series | More Info |
| Extra charge double ring packer roller | - Extra charge Double ring packer roller with 2x roof profile instead of the standard 1x roof profile and 1x pane
- Recommended in the case of sand and mouldy soil
| TG Series | More Info |
| Hydraulic Stump-Jump System | - Hydraulic Stump-Jump System
- Releasing force at wing blade 600 kg
| TG Series | More Info |
| Pneumatic standard seed mega drill | - The proven metering system for all the usual kinds of seed and adjustable to fine seed without need for any tools
- The free-wheel clutch in the metering system stops the meter being accidentally rotated backwards
- Electronically controlled seed unit (Müller Electronics)
- The mounted seed hopper holds approx. 1000 litres
- Platform with access steps and handrail
| TG Series | More Info |
| Rear harrow | - Rear harrow 3-section
- Tines spacing 10 cm variably changeable
- Tines thickness Ø 12 mm with leaf spring 40 x 3 mm
| TG Series | More Info |
| Seed drill assembly | - Seed drill assembly when ordering with cultivator
| TG Series | More Info |
| TFGS | - Electrical tramline control, fits all types
| TG Series | More Info |
| TG300A | - Attachments for TG300 for subsequent extension onto TG440 or TG580 with reinforced lifting cylinder, tyres and brake axle
| TG Series | More Info |
| TG300B | - Brake axle for subsequent fitting of 2-tubed compressed air unit
| TG Series | More Info |
| TG300D | - Compressed air unit for TG300
| TG Series | More Info |
| TGABZ_TG | - After-crop spreader for rear attachment (see harrow price list)
- Attachments for after-crop spreader at the rear with access steps, platform and a one-sided safety handrail
| TG Series | More Info |
| TGAS | - After-crop spreader for rear attachment (see harrow price list)
- Access steps handrail and platform for filling the large seed hopper accessible at the rear
| TG Series | More Info |
| TGGA | - Fan drive by way of pump connected to tractor PTO shaft with 25 litre oil tank and oil cooler 12V for tractor without load sensing
| TG Series | More Info |
| TGHS | | TG Series | More Info |
| TGM65 | - Treffler chisel blade 40 mm wide
| TG Series | More Info |
| TGMM | - Track marker to centre of tractor
| TG Series | More Info |
| TGP300 | - After-crop sowing using mega drill seed technology with additional impact plate mounted at the rear (only for TG300)
| TG Series | More Info |
| TGRB | - Edge plate set, upward folding
| TG Series | More Info |
| TGRDS | - RDS - Artemis seed drill control system with radar sensor motor-driven actuation of metering system.
- All functions are electrically monitored, thus no tail wheel required Net
| TG Series | More Info |
| TGRDSSM | - Seedmon seed pipe monitoring available for the RDS - Artemis seed drill control system Net
| TG Series | More Info |
| TGRÜ | | TG Series | More Info |
| TGS260 | - Treffler plough blade 260 mm wide ground
| TG Series | More Info |
| TGST1500 | - Extra charge for seed hopper 1500 litres
| TG Series | More Info |
| TGST2000 | - Extra charge for seed hopper 2000 litres
| TG Series | More Info |
| TGTV | - Traction reinforcer variable rear axle loading up to 1500 kg possible
| TG Series | More Info |
| TGÜK | - Surveillance camera, 2 cameras and 1 monitor
| TG Series | More Info |
| TSB_TG | - Warning sign with lighting at the front and rear
| TG Series | More Info |
| 8092376 | - Travel signal as of GPS receiver
| TGA Series | More Info |
| 8092377 | - Lift sensor for the Seedmaster control electronic system
| TGA Series | More Info |
| 2-Row rear harrow | - 2-row rear harrow TGA series
| TGA Series | More Info |
| 3-Row rear harrow | - 3-row rear harrow TGA series
| TGA Series | More Info |
| Attachments for 2-row rear harrow | - Attachments for 2-row rear harrow TGA series
| TGA Series | More Info |
| Attachments for 3-row rear harrow | - Attachments for 3-row rear harrow TGA series
| TGA Series | More Info |
| Attachments for closer | - Attachments for closer TGA series
| TGA Series | More Info |
| Attachments for closer and 3-row rear harrow | - Attachments for closer and 3-row rear harrow TGA series
| TGA Series | More Info |
| Attachments for packer roller and closer | - Attachments for packer roller and closer TGA series
| TGA Series | More Info |
| Closer | | TGA Series | More Info |
| EPS5SM | - Type EPS 5 seeder with Seedmaster type control electronic system
| TGA Series | More Info |
| Packer roller | - Socket connector packer roller Ø 600 mm TGA series
| TGA Series | More Info |
| Stabilising wheels tyres | - Tandem suspended stabilising wheels tyres 195/55R10C TGA series
| TGA Series | More Info |
| TGABZ_TGA | - Attachments for after-crop spreader at the rear with access steps, platform and a one-sided safety handrail
| TGA Series | More Info |
| TGAHA | - Hydraulic extendable edge closers
| TGA Series | More Info |
| TGAHF | - Front/rear design for the TGA series
| TGA Series | More Info |
| TGRB | - Edge plate set, upward folding
| TGA Series | More Info |
| TGWB2 | - Warning sign with lighting at the front and rear
| TGA Series | More Info |
| Cultivating blade | - TH tines unit Cultivating blade 6 mm spring leaf thickness
- Weight approx. 4.5 kg
- Complete with clamping plate and extra springs
| TH Series | More Info |
| Duck foot blade | - TH tines unit Duck foot blade 6 mm spring leaf thickness
- Weight approx. 5.6 kg
- Complete with clamping plate and extra springs
| TH Series | More Info |
| THGF150_TH | - TH duck foot blade - single
- Weight approx. 1.8 kg
- Complete with clamping plate and extra springs
| TH Series | More Info |
| THZS | - TH tines unit Drag knife
- Weight approx. 8.2 kg
- Complete with clamping plate and extra springs
| TH Series | More Info |
| THZT | - TH tines unit Torsion tines
- Weight approx. 7.5 kg
- Complete with clamping plate and extra springs
| TH Series | More Info |
| THZZ | - TH tines unit Closer
- Weight approx. 6.5 kg
- Complete with clamping plate and extra springs
| TH Series | More Info |
| 8092372 | - Seed technology for precision tined weeder
- Seedmaster type control electronic system for EPS5 seeder instead of tail wheel drive (only with hydraulic or PTO shaft fan )
| TS Series | More Info |
| 8092376 | - Seed technology for precision tined weeder
- Travel signal as of GPS receiver
| TS Series | More Info |
| 8092377 | - Seed technology for precision tined weeder
- Lift sensor for the Seedmaster control electronic system
| TS Series | More Info |
| EPS5 | - Seed technology for precision tined weeder
- Pneumatic seeder
- 200 litre hopper with 2 electric fans up to a 7.70 m working width
- More powerful fan
- Ground drive
- 8 distributors incl. 8 distributor holders
- 4 rubber buffers
- 2 metering rollers (8R3S, 8R1R1)
- Cable set on the tractor side
- Calibration trough
- Operating and installation instructions
| TS Series | More Info |
| EPSH5 | - Seed technology for precision tined weeder
- Pneumatic seeder
- 200 litre hopper with hydraulic fan for 6 m–12 m working widths
- More powerful fan
- Ground drive
- 16 distributors
- 16 distributor holders
- 8 precision Y-distributors
- 4 rubber buffers
- 2 metering rollers (8R3S, 8R1R1)
- Cable set on the tractor side
- Calibration trough
- Operating and installation instructions
| TS Series | More Info |
| EPSH5-15 | - Seed technology for precision tined weeder
- Pneumatic seeder
- 200 litre hopper with hydraulic fan TS1520
- More powerful fan
- Ground drive
- 24 distributors
- 24 distributor holders
- 8 precision three-fold distributors
- 4 rubber buffers
- 2 metering rollers (8R3S, 8R1R1)
- Cable set on the tractor side
- Calibration trough
- Operating and installation instructions
| TS Series | More Info |
| Hydraulic smooth tines pressure adjustment | - Hydraulic smooth tines pressure adjustment, with double-acting hydraulic cylinder
- Throttle valve for precision control. Large dial can be monitored from the tractor.
- 1 additional DW control unit is needed.
| TS Series | More Info |
| TS100 | - Frame section inclusive of central adjuster and key price per metre
| TS Series | More Info |
| TSAB18 | - Extra charge for tyres 18 x 8.5 6 PR / wheel
| TS Series | More Info |
| TSABT09 | - Seed technology for precision tined weeder
- Attachments for pneumatic seeder for all types 7–15 m working width with access steps and platform for filling the seed
| TS Series | More Info |
| TSAHG | - Seed technology for precision tined weeder
- Additional charge for hydraulic fan
| TS Series | More Info |
| TSAHZ | - Extra charge for tines with carbide metal layer Net price per tine
| TS Series | More Info |
| TSAZG | - Seed technology for precision tined weeder
- Extra charge for PTO shaft fan incl. propeller shaft to the hydraulic fan
- ONLY FOR FIRST ORDERS! On retrofitting a small modification is needed.
| TS Series | More Info |
| TSB_TS | - 1 Set -four (4) warning signs with fixing device and lighting to the front and rear
| TS Series | More Info |
| TSFC | - Additional charge for combi-springs Net price per tine
| TS Series | More Info |
| TSHF1 | - Front/rear version for all 1-section harrows
| TS Series | More Info |
| TSHF3 | - Front/rear version for all 3-section harrows
| TS Series | More Info |
| TSHF5 | - Front/rear version for all 5-section harrows
| TS Series | More Info |
| TSHVE3 | - For 3-section harrow
- Electro-hydraulic control for tines pressure adjustment Box with toggle switch and hydraulic distributor with electro-valves.
- Only 1 DW control unit with float position is needed for the harrow folding system and tines pressure adjustment.
| TS Series | More Info |
| TSHVE5 | - For 5-section harrow
- Electro-hydraulic control for tines pressure adjustment Box with toggle switch and hydraulic distributor with electro-valves.
- Only 1 DW control unit with float position is needed for the harrow folding system and tines pressure adjustment.
| TS Series | More Info |
| TSKM | - Flow divider for the folding system of the harrow side sections with 1 DW control unit Both side sections swing out or in at the same time. When turning over (e.g. S1220M3) the outer side sections can be slightly raised with a DW control unit.
- Electro-hydraulic control for tines pressure adjustment Box with toggle switch and hydraulic distributor with electro-valves.
- Only 1 DW control unit with float position is needed for the harrow folding system and tines pressure adjustment.
| TS Series | More Info |
| TSMW | - 2 manual reversible hydraulic valves
| TS Series | More Info |
| TSPS410 | - Seed technology for precision tined weeder
- Extra charge for hopper 410 litres
| TS Series | More Info |
| TSPSA | - Seed technology for precision tined weeder
- Attachments for pneumatic seeder for Treffler Precision tined weeder up to a 7.70 m working width
- Console for seeder
- Steps with platform
- Without installation
| TS Series | More Info |
| TSPSD | - 1 (one) parallelogram controlled suspended stabilising wheel for ridge cultivation
| TS Series | More Info |
| TSPS-M03 | - Seed technology for precision tined weeder
- Installation of the pneumatic seeder for Treffler Precision tined weeder up to a 7.70 m working width
| TS Series | More Info |
| TSPS-M09 | - Seed technology for precision tined weeder
- Installation of the pneumatic seeder for all types 7–12m working width
| TS Series | More Info |
| TSQU | - Rear traverse beam for track adjustment of the suspended stabilising wheels incl. 2 stabilising wheel holding fixtures
| TS Series | More Info |
| TSQU/80 | - Rear traverse beam for track adjustment 80 x 80
| TS Series | More Info |
| TSS | - Extra charge for 2 additional stabilising wheels complete 16 x 6.5–8
| TS Series | More Info |
| TSSC | - Drag scraper for grassland of a 1 m working width
| TS Series | More Info |
| TSSP | - 1 set of suspended stabilising wheels for rear attachment for working with upper link with slot
| TS Series | More Info |
| TSSS | - 1 set of track harrows fitted behind the suspended stabilising wheels
| TS Series | More Info |
| TSW | - 1 Set - 4 (four) warning signs with fixing device to the front and rear
| TS Series | More Info |